目前电动卷帘门在市面上得到了广泛的应用，电动卷闸门是以多关节活动的门片串联，由电动机组带动，在固定的滑道内，以门上方卷轴为转动上下的门。它通过遥控器的控制来实现窗帘的上升、停止、下降动作。在使用电动卷帘门是常见问题是电机频繁使用，导致电机发热停止，这个问题是什么原因导致的呢？济南卷帘门厂家为您解答。

At present, the electric roller shutter door has been widely used in the market. The electric roller shutter is a door that is connected in series with multi joint movable doors, driven by the motor unit, and rotates up and down in the fixed slide way with the roller above the door as the center. The curtain can be raised, stopped and lowered through the control of the remote controller. When using the electric roller shutter door, the common problem is that the motor is frequently used, which causes the motor to stop heating. What causes this problem? Jinan roller shutter door manufacturer answers for you.

在电动卷帘门使用在电机过热是常见问题，如果长时间出现电机过热会导致电机寿命降低，严重情况是直接烧坏电机，导致电机报废。出现过热问题一般是卷帘门频繁关闭或者卷闸门卷过头，再或者是卷闸门使用时间久在上升、下降的过程中卡机，运行不顺畅等，这些问题都会导致电机过热。而厂家为了解决电机过热就要想办法解决这一问题。

Motor overheating is a common problem in the use of electric roller shutter doors. If motor overheating occurs for a long time, motor life will be reduced. In serious cases, the motor will be directly burned, resulting in motor scrap. The overheating problem usually occurs when the roller shutter is closed frequently or the roller shutter is rolled over, or when the roller shutter is used for a long time, the machine jams in the process of rising and falling, and the operation is not smooth. These problems will lead to motor overheating. In order to solve the motor overheating, the manufacturer must find a way to solve this problem.

通常解决电动卷帘门过热问题，只要在电机中安装温控开关便可以了，这是简单方便的一种方法。热保护器作用是非常强大的，在长时间连续运转导致电机过热时，这个热会传导到温控开关，温控开关接收到温度后，会自动断开，使电机停止运行。

Usually, it is a simple and convenient method to solve the overheating problem of electric roller shutter door by installing a temperature control switch in the motor. The thermal protector is very powerful. When the motor is overheated due to long-time continuous operation, the heat will be transmitted to the temperature control switch, which will automatically disconnect after receiving the temperature to stop the motor.

就是电机中自带的过热保护装置-温控开关发生了保护作用，所以当遇到电动卷帘门电机频繁使用发热停止运行时，不要担心，可能是温控开关在进行保护。此种情况下，请停止一切操作，待电机温度降低到范围后，即可恢复正常工作。

It means that the temperature control switch, the built-in overheat protection device in the motor, has a protective effect. So when the motor of the electric roller shutter stops running due to frequent use of heat, don't worry. It may be the temperature control switch that is protecting. In this case, please stop all operations and resume normal operation after the motor temperature is reduced to a safe range.

电动卷帘门电机频繁使用发热停止是什么原因？这就是很多人问到的问题，以上就是小编给您的解答，您可以作为参考信息多看看，更多注意事项可以来我们网站http://xl0475.com咨询了解。

What is the reason why the electric roller shutter motor is frequently used to stop heating? This is the question that many people ask, and the above is the answer given to you by the editor. You can take a look at it as reference information and visit our website for more precautions http://xl0475.com Ask about it.