准备工作

preparation

检查产品：对照发货清单，仔细检查快速卷帘门的门体、电机、控制系统、导轨、密封件等部件是否齐全，有无损坏或变形。

Check the product: Refer to the shipping list and carefully inspect the door body, motor, control system, guide rail, seals and other components of the quick rolling shutter door for completeness, damage or deformation.

工具准备：准备好电钻、扳手、螺丝刀、水平仪、卷尺、电焊机等必要的安装工具。

Tool preparation: Prepare necessary installation tools such as drill, wrench, screwdriver, level, tape measure, and welding machine.

快盈11v场地清理：清理安装现场，确保地面平整、干净，无杂物和障碍物，为安装工作提供足够的空间。

Site cleaning: Clean up the installation site to ensure that the ground is flat, clean, free of debris and obstacles, and provide sufficient space for installation work.

安装导轨

Install the guide rail

定位划线：根据门的尺寸和安装位置，使用水平仪和卷尺在门洞两侧的墙面上准确测量并标记出导轨的安装位置，保证导轨处于垂直状态且相互平行。

Positioning and marking: Based on the size and installation position of the door, use a level and tape measure to accurately measure and mark the installation position of the guide rail on the walls on both sides of the door opening, ensuring that the guide rail is in a vertical and parallel state.

固定导轨：在标记好的位置上打孔，然后使用膨胀螺栓或焊接的方式将导轨牢固地固定在墙面上。安装过程中要不断用水平仪进行校准，确保导轨的垂直度和水平度误差在允许范围内。

快盈11vFixed guide rail: Drill holes in the marked positions, and then use expansion bolts or welding to firmly fix the guide rail to the wall. During the installation process, it is necessary to continuously calibrate with a spirit level to ensure that the verticality and levelness errors of the guide rail are within the allowable range.

安装门体

Install the door body

快盈11v组装门帘：按照门体的组装说明，将快速卷帘门的帘片逐一连接组装起来，形成完整的门帘。注意帘片之间的连接要紧密、牢固，确保门帘的整体性和稳定性。

Assemble door curtain: According to the assembly instructions of the door body, connect and assemble the curtain pieces of the quick rolling shutter door one by one to form a complete door curtain. Pay attention to the tight and secure connection between the curtain panels to ensure the overall integrity and stability of the door curtain.

安装门帘：将组装好的门帘一端与卷轴连接固定，然后将门帘沿着导轨缓缓放下，使门帘的边缘与导轨的卡槽完全吻合，保证门帘在导轨内能够顺畅滑动。

快盈11vInstallation of door curtain: Connect and fix one end of the assembled door curtain to the scroll, then slowly lower the door curtain along the guide rail, so that the edge of the door curtain fully matches the slot of the guide rail, ensuring that the door curtain can slide smoothly inside the guide rail.

安装卷轴和电机

快盈11vInstall the scroll and motor

安装卷轴：将卷轴安装在门的上方，通过支架或吊架将其固定在墙体或天花板上，确保卷轴安装牢固且水平。

快盈11vInstall scroll: Install the scroll above the door and secure it to the wall or ceiling using brackets or hangers, ensuring that the scroll is securely and horizontally installed.

快盈11v连接电机：将电机与卷轴进行连接，通常采用链条或皮带传动的方式。调整好传动装置的松紧度，保证电机能够平稳地驱动卷轴转动。然后将电机的电源线连接到合适的电源插座上，并确保接地良好，以保障。

快盈11vConnecting motor: Connect the motor to the reel, usually using a chain or belt drive. Adjust the tightness of the transmission device to ensure that the motor can smoothly drive the reel to rotate. Then connect the power cord of the motor to a suitable power outlet and ensure good grounding to ensure safety.

安装控制系统

Install control system

安装控制箱：将控制箱安装在便于操作和观察的位置，一般距离地面 1.2 - 1.5 米左右。使用螺丝将控制箱固定在墙面上，然后连接好电源线和电机线。

Installation of control box: Install the control box in a location that is easy to operate and observe, generally about 1.2-1.5 meters above the ground. Use screws to secure the control box to the wall, and then connect the power and motor wires.

快盈11v调试控制功能：根据控制箱的说明书，设置好门的开启和关闭速度、限位位置、保护功能等参数。通过遥控器或控制按钮进行测试，检查门的升降是否正常，各项功能是否有效。

快盈11vDebugging control function: According to the instruction manual of the control box, set the parameters of the door's opening and closing speed, limit position, safety protection function, etc. Test through remote control or control buttons to check if the door lifting is normal and if all functions are effective.

安装装置

快盈11vInstall safety devices

安装红外感应装置：在门的两侧安装红外感应探头，确保其位置准确，能够有效感应到门附近的物体或人员。当有物体或人员遮挡红外光线时，门应立即停止关闭或重新打开。

快盈11vInstall infrared sensing devices: Install infrared sensing probes on both sides of the door to ensure accurate positioning and effective sensing of objects or people near the door. When an object or person blocks infrared light, the door should immediately stop closing or reopen.

安装气囊：在门的底部安装气囊，当门在关闭过程中触碰到障碍物时，气囊受到挤压会触发微动开关，使门立即停止关闭并向上打开，起到保护作用。

Installing safety airbags: Install safety airbags at the bottom of the door. When the door touches an obstacle during the closing process, the airbag will be compressed and trigger a micro switch, causing the door to immediately stop closing and open upwards, providing protection.

整体调试与检查

Overall debugging and inspection

运行调试：在安装完成后，多次进行门的升降操作，检查门的运行是否平稳，有无卡顿、异响或跑偏现象。观察门的开启和关闭速度是否符合要求，限位位置是否准确。

Run debugging: After installation, perform multiple door lifting operations to check if the door runs smoothly, without any jamming, abnormal noise, or deviation. Observe whether the opening and closing speed of the door meets the requirements, and whether the limit position is accurate.

检查：对安装的装置进行检查，测试红外感应装置和气囊的灵敏度和可靠性。确保在各种情况下，装置都能正常工作，保障人员和设备的。

快盈11vSafety inspection: Conduct a comprehensive inspection of the installed safety devices, test the sensitivity and reliability of the infrared sensing device and airbag. Ensure that safety devices are functioning properly in all situations, safeguarding the safety of personnel and equipment.

快速卷帘门的使用方式

快盈11vHow to use the fast rolling shutter door

手动操作：一般快速卷帘门配备有手动拉绳或手动摇杆，当遇到停电或电机故障等特殊情况时，可以通过拉动拉绳或转动摇杆来实现门的升降。

Manual operation: Generally, fast rolling shutter doors are equipped with manual pull ropes or manual joysticks. In case of power outages or motor failures, the door can be raised or lowered by pulling the pull rope or rotating the joystick.

遥控操作：使用遥控器是快速卷帘门常见的使用方式。操作人员可以在一定距离内，通过按下遥控器上的相应按钮，轻松控制门的开启和关闭。

Remote control operation: Using a remote control is the most common way to use fast rolling shutter doors. The operator can easily control the opening and closing of the door by pressing the corresponding button on the remote control within a certain distance.

自动感应操作：快速卷帘门可以与红外感应装置、地磁感应装置等配合使用。当有车辆或人员靠近门时，感应装置会自动检测到并发送信号给门的控制系统，门会自动开启；当车辆或人员通过后，门会自动关闭，实现自动化的通行管理。

Automatic sensing operation: The fast rolling shutter door can be used in conjunction with infrared sensing devices, geomagnetic sensing devices, etc. When a vehicle or person approaches the door, the sensing device will automatically detect and send a signal to the door control system, and the door will automatically open; When vehicles or personnel pass by, the door will automatically close, achieving automated traffic management.

联动操作：在一些大型场所或自动化生产线上，快速卷帘门可以与其他设备或系统进行联动。例如，与输送带、门禁系统等进行联动，实现整个生产流程或物流管理的自动化和智能化。

Linkage operation: In some large venues or automated production lines, fast rolling shutter doors can be linked with other equipment or systems. For example, linking with conveyor belts, access control systems, etc. to achieve automation and intelligence of the entire production process or logistics management.

分享详细介绍一下快速卷帘门使用安装方式中的安装卷轴和电机步骤快速卷帘门的维护和保养方法有哪些？安装快速卷帘门时要注意哪些事项？

What are the steps for installing the scroll and motor in the installation method of the quick rolling shutter door? What are the maintenance and upkeep methods for the quick rolling shutter door? What safety precautions should be taken when installing a quick rolling shutter door?