Windproof rolling shutter door has the advantages of strong sealing, anti wind pressure, beautiful appearance, no rust, anti-theft, low noise, fast speed, high opening frequency, good safety performance, occupying less space on the top, easy to arrange and so on. Do you know how to do for the installation and debugging of windproof rolling shutter door?

一、本产品按右安装方案制造（从室内朝门外看），若需左安装，应将制动壳体上4只螺钉M5旋松，再旋转壳体180°后重新平衡锁紧，并把按钮开关上白、绿色线对调连接；

1、 The product is manufactured according to the right installation scheme (viewed from the indoor and outdoor). If it needs to be installed on the left, loosen the four screws M5 on the brake housing, and then rotate the housing 180 ° to rebalance and lock, and connect the white and green lines on the button switch;

二、卷门机应水平安装，卷轴应水平、同心，门帘升降无滞卡；

2、 The door rolling machine shall be installed horizontally, the reel shall be horizontal and concentric, and the curtain shall be lifted without stagnation;

三、传动链条调整：先调松支架板上小链轮的固定螺栓M6，再调整卷门机变速箱上的2只螺栓M8，使传动链条下垂度为3-6mm（未装门帘前调整），再锁紧3只支脚螺母M10；

Three, transmission chain adjustment: first, loose the fixed bolt M6 of the small sprocket on the support plate, then adjust the 2 bolts M8 on the gearbox of the rolling door machine, so that the sag of the transmission chain is 3-6mm (not adjusted before the curtain), and then 3 locking nuts M10 are locked.

四、卷帘门的上下行程调整：试机前先拧松限位滑块上的2只紧定螺钉，把门帘上升欲定的高度,旋动上行限位螺套触压到微动开关，听到“嘀达”声拧紧螺钉；再把门帘降地面，确定下行限位螺套位置，用手指用力拧紧2只紧定螺钉。

4、 Adjustment of the up and down travel of the rolling shutter door: before the test run, first loosen the two set screws on the limit slider, raise the curtain to the desired height, rotate the upper limit screw sleeve to touch and press it to the microswitch, and then tighten the screw when hearing the sound of "Dida"; then lower the curtain to the ground to determine the position of the downward limit screw sleeve, and finally tighten the two set screws with fingers.

防风卷帘门，适用于中高档厂房门,工业门,小型机库门,制作面积为65,制作宽度13米，如果您对防风卷帘门有需求，欢迎来电咨询。

Windproof rolling shutter door, suitable for medium and high-grade workshop door, industrial door, small machine room door, the maximum production area is 65 square meters, the maximum production width is 13 meters, if you have the demand for windproof rolling shutter door, welcome to inquire.