The development of roller shutter door in China has been quite mature. Both enterprise garage and personal garage are widely used, and the safety measures of fire prevention and anti-theft are also very perfect. Ji "the market demand of South rolling shutter door is also very large. Many consumers buy rolling shutter door manufacturers to measure, and return to the manufacturers after measurement. This undoubtedly increases the process and wastes a lot of time. Today, Jinan rolling shutter door manufacturers explain to you five points for attention of consumers' self measurement:

　　1.双面直角墙。测量师应主动征求客户对济南卷材门的意见，结果:一是客户选择保留左右线，均匀美观，测量师可采取减小目标尺寸120mm，即能达到上述目标;二是客户选择的目标尺寸不变，安装工人依靠两侧直角墙的线切割小到合适。

　　1. Double sided right angle wall. The surveyors should take the initiative to ask the customers for their opinions on Jinan coiled material door. The results are as follows: first, the customers choose to keep the left and right lines, which are even and beautiful. The surveyors can reduce the target size by 120mm, which can achieve the above goals; second, the target size chosen by the customers remains unchanged, and the installation workers rely on the line cutting of the two side right angle walls to be small to appropriate.

　　2.上墙的直角。计量应主动征求济南卷帘门客户意见，是客户选择保留线条，均匀美观，计量可采取减少(低)目标尺寸60mm，即能达到上述目标;二是客户选择目标尺寸不变，安装工人把线剪到合适。

　　2. Right angle to the wall. The measurement should actively seek the opinions of Jinan roller shutter door customers. First, the customers choose to keep the line, which is even and beautiful. The measurement can reduce (low) the target size by 60mm, that is to say, the above goals can be achieved. Second, the customers choose the target size unchanged, and the installation workers cut the line appropriately.

　　3.地板上。由于客户的实际情况差别很大，一般分为三种:种是已经铺好了的地板，用测量的方法可以测量;二是未铺砌的地面，高度应减小尺寸:A、地砖:大理石、瓷砖统一减小50mm;B.瓷砖木地板、复合地板、实木地板减少30mm;C、骨架木地板以骨架为骨架，实际地板厚度增加10mm。

　　3. On the floor. As the actual situation of customers is quite different, it is generally divided into three types: the first one is the paved floor, which can be measured by the measurement method; the second one is the unpaved floor, whose height should be reduced by size: A. floor tiles: marble and ceramic tiles are reduced by 50mm; B. ceramic tile wood floor, composite floor and solid wood floor are reduced by 30mm; C. The skeleton wood floor takes the skeleton as the skeleton, and the actual floor thickness increases by 10 mm.

　　4.左右墙面和上墙面墙面的垂直度和坡度。测量员应该小心选择zui点作为目标尺寸。

　　4. Perpendicularity and gradient of left and right walls and upper walls. The surveyor should carefully select Zui point as the target size.

　　5.单一的矩形。测量师应主动征求客户的意见，结果如下:，客户选择保留左右两边的线条，统一美观。验船师和客户建议将目标尺寸减少60mm，以实现保留线条的愿望。第二,客户选择目标大小不变(客户请求门的门有点大),必须与客户解释,依赖于直角墙框架边缘线安装切小,直到适当的(是左右不对称行)的影响。

　　5. Single rectangle. Surveyors should take the initiative to ask customers for their opinions. The results are as follows: first of all, customers choose to keep the lines on the left and right sides, unified and beautiful. Surveyors and customers recommend reducing the target size by 60mm to achieve the desire to retain the line. Second, the size of the target selected by the customer remains the same (the door requested by the customer is a little large), which must be explained to the customer, and it depends on the installation of the right angle wall frame edge line to be cut down until the impact of the appropriate (left and right asymmetric lines).

　　只要消费者记住上面的5分的关注,可以简便测量的大小需要安装百叶窗大小,所以你可以直接与济南卷帘门制造商沟通,帮助你节约时间,快速安装可靠和实用的百叶窗!

　　As long as consumers remember the above 5 points of concern, the size that can be easily measured needs to be installed with louvers, so you can directly communicate with the manufacturer of Jinan roller shutter door to help you save time and quickly install reliable and practical louvers!