由于家中的车库门使用非常的频繁，所以有时候车库门会出现一些这样或那样的问题，但是济南车库门维修又是件非常棘手的事，所以在当车库门发生一些问题的时候我们该如何快速的解决呢？

Due to the frequent use of garage doors at home, sometimes there may be some problems with garage doors. However, maintenance of garage doors in Jinan is a very tricky task, so how can we quickly solve problems with garage doors?

1.检查电源

1. Check the power supply

如果您家的车库开门器没有反应，您要做的就是检查它是否正与电源相连接。您可以查看一下电源和车库门的传感器以及墙上的灯，看看它们是否通电。如果没有，拔下插销，然后再插一次，如果还没有反应，可以去电闸箱检查一下保险开关。

If your garage door opener is not responding, all you need to do is check if it is connected to the power supply. You can check the power supply, garage door sensors, and wall lights to see if they are powered on. If not, unplug the plug and plug it again. If there is no response, you can go to the power switch box to check the safety switch.

2.确保没有上锁

2. Ensure that it is not locked

有的时候车库门打不开，可能是因为车库开门器被锁上了，这是车库门的一个功能。您可以检查安装在墙上的车库开门按钮，在上面有个绿色的灯(有时这个灯可能在外壳内，需要用改锥将塑料外壳拆下才可以看到)。如果绿色按钮在闪烁，就证明车库门已经锁上了。在这种情况下，只需按住“锁定”按钮几秒钟，直到绿灯停止闪烁，然后再次尝试打开您的车库门。

Sometimes the garage door cannot be opened, possibly because the garage door opener is locked, which is a safety feature of the garage door. You can check the garage door button installed on the wall, which has a green light on it (sometimes this light may be inside the casing and needs to be removed with a screwdriver to see it). If the green button is flashing, it indicates that the garage door has been locked. In this case, simply press and hold the 'lock' button for a few seconds until the green light stops flashing, and then try opening your garage door again.

3.传感器

3. Safety sensors

在车库门的下方都会有两个传感器，这个传感器的作用是防止车库门在关闭时夹到人或宠物。这个传感器是由一个红外发射器和一个红外接收器所组成，以确保每一次开关门都是的。

There are two safety sensors located below the garage door, which are designed to prevent people or pets from getting caught when the garage door is closed. This sensor is composed of an infrared transmitter and an infrared receiver to ensure that every door opening and closing is safe.

在这个传感器上都会有指示灯，如果其中一个灯不亮了，传感器可能会认为它探测到了车库门的路径上有物体，所以会导致车库门一直关不上。一般来说，这种情况可能是由于传感器被杂物挡住，或是两个传感器的位置有所偏移，没有对齐。

On this safety sensor, there will be indicator lights. If one of the lights is not on, the sensor may assume that it has detected an object in the path of the garage door, which will cause the garage door to remain closed. Generally speaking, this situation may be due to the safety sensor being blocked by debris, or the positions of the two sensors being offset and not aligned.

接下来，沿着连接传感器的电线一直向上排查，以确保它没有损坏或切断。

Next, follow the wire connecting the sensor all the way up to ensure it is not damaged or cut off.

如果您的车库门还是关不上，马达上的灯还在闪烁，传感器可能还会“检测”到有物品遮挡。您可以通过按住挂在墙上的车库门按钮来暂时关闭此功能(在确保关闭车库是的之后)。如果您家的车库门关得很好，而且确实没有任何东西挡住传感器，那么可能就是传感器本发生了故障。

If your garage door still cannot be closed, the lights on the motor are still flashing, and the sensor may also "detect" an object blocking it. You can temporarily turn off this function by pressing and holding the garage door button hanging on the wall (after ensuring that closing the garage is safe). If your garage door is closed well and there is indeed nothing blocking the sensor, then it may be that the sensor has malfunctioned.

车库门出现问题的检查事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站http://xl0475.com咨询吧！

That's all we need to explain the inspection items for garage door problems. We hope you can be helpful. For more information, please visit our website http://xl0475.com Consult!