快盈11v

快盈11v网站 在线留言 联系我们

服务咨询热线

151 6888 2846

热门关键词: 水晶折叠门 水晶卷帘门 抗风卷帘门

行业新闻

首页>>新闻资讯>>行业新闻怎么样做好卷帘门的防锈蚀和浸蚀
联系我们
快盈11v

联系人:林经理

电话:151 6888 2846

邮箱:527800164@qq.com

地址:快盈11v济南市历下区化纤厂路8号3号楼101号

怎么样做好卷帘门的防锈蚀和浸蚀

来源:http://xl0475.com 日期:2022-12-22 发布人:
卷帘门使用时间久一点就会遇见生锈或腐蚀的,很多时候是由于使用者没有及时清洁保养,任由风吹雨淋。那么怎么样做好卷帘门的防锈蚀和浸蚀?下面济南卷帘门厂家为您解答。
The rolling shutter door will be rusted or corroded if it is used for a long time. Most of the time, it is because the user has not cleaned and maintained it in time, leaving it exposed to the wind and rain. How to prevent rust and corrosion of rolling shutter door? Now the manufacturer of Jinan roller shutter door will answer for you.
1、当卷帘门拉下知道极限长度的时分跟地上距离不应该大于50mm。
1. When the roller shutter door is pulled down and the limit length is known, the distance to the ground shall not be greater than 50mm.
2、卷帘门金属部位要留心保护和维护,防止有生锈或许腐蚀现象呈现。
2. The metal parts of the roller shutter shall be carefully protected and maintained to prevent rust or corrosion.
3、卷帘门设备方位上方有必要具有防火设备,下端安排包箱或许吊顶时有必要设置活动拆式活动盖板,下端有必要预留500mm边长的可拆卸修孔,便于修补维护。
3. It is necessary to have fire protection equipment above the roller shutter equipment. It is necessary to set removable movable cover plate when arranging bags or ceiling at the lower end. It is necessary to reserve a removable repair hole with a side length of 500mm at the lower end to facilitate repair and maintenance.
4、卷帘门底梁座上限方位有必要跟轴承较少200mm距离,制动中止时不发生冲顶的现象。
4. It is necessary to keep a distance of 200mm from the bearing at the upper limit of the roller shutter sill seat, and there will be no jacking when the braking stops.
济南卷帘门
5、在卷帘门运用前先检查理解其工作方向,长度极限以及门洞高度的方位,也不要轻易损坏限位器,防止构成反卷冲顶等丢掉。
5. Before using the roller shutter, check and understand its working direction, length limit and door opening height, and do not damage the limiter easily to prevent it from being thrown away, such as forming a reverse roll.
6、卷帘门工作时如果呈现较大颤抖或许是反常动静时建议当即停机检查,并且检查是不是有阻挠工作的杂物。
6. It is recommended to stop the machine for inspection immediately if the rolling shutter door appears large shaking or abnormal movement during operation, and check whether there are sundries blocking the operation.
7、建议每年对卷门机进行3次检查,及时上油工作质量。
7. It is recommended to inspect the door winder three times a year to ensure timely oiling quality.
8、卷帘门操作的时分,操作者有必要站在卷门工作情况方位进行操作,防止发生意外损害。
8. When the roller shutter is operated, it is necessary for the operator to stand at the working position of the roller shutter to prevent accidental damage.
所以在实践的操作中,仍是要注意些卷帘门的运用与保护事项。更多相关事项就来我们网站http://xl0475.com看看吧!
Therefore, in the practical operation, it is still necessary to pay attention to the application and protection of rolling shutter doors. Come to our website for more information http://xl0475.com Look!

阅读/ Recommended reading

快盈11v一、查看线路1、 View routes就是在使用这类产品的时候,如果出现了故障,那么应该注意的就是对于整个产品的情况的检查与了解,因为有的时候可能出现的问题并不是整个门真...

防火卷帘门分几种类别? 2024-06-06
防火卷帘门对于企业的使用有哪些? 2024-06-09
济南卷帘门:卷帘门的工作原理以及工作过程 2024-05-23
济南卷帘门:如何调节卷帘门限位? 2024-05-17
济南卷帘门:电动卷帘门的优势有哪些? 2024-05-15
济南卷帘门:电动卷帘门遥控器相关知识介绍 2024-05-11
济南卷帘门:卷帘门的用处有哪些? 2024-05-08
防火卷帘门保护装置特点 2024-04-18