电动车库门需要电，哪里是安装电源插座的佳位置是我们应该考虑的一个问题。电动车库门安装后，发现电源位置不对后再换，会造成不必要的浪费。那么济南车库门的电源放在哪个位置合适呢？

The electric garage door needs electricity. Where is the best place to install the power socket is a problem we should consider. After the electric garage door is installed, it will cause unnecessary waste if the power supply is replaced after the wrong position is found. So where is the power supply for Jinan garage door?

电动车库门的电机插座一般在1.5m左右，电源安装在哪里要看安装什么样的车库门。翻板车库门的电机在车库中间的后面，电源在后面。按照门口的高度，应该和门口高度加一米差不多。比如门口高2.5m，电源可以安装在后面3.5m的门口中间。如果要安装卷帘门，电源插座应安装在门洞两侧的上方位置，距离门洞一米左右。车库门电机的功率一般在80W到500W之间，所以电源线按2.5的标准即可。

The motor socket of the electric garage door is generally about 1.5m. Where the power supply is installed depends on what kind of garage door is installed. The motor of the flap garage door is behind the middle of the garage, and the power supply is behind. According to the height of the door, it should be about the same as the height of the door plus one meter. For example, the door is 2.5m high, and the power supply can be installed in the middle of the door 3.5m behind. If the roller shutter door is to be installed, the power socket shall be installed at the upper position on both sides of the door opening, about one meter away from the door opening. The power of the garage door motor is generally between 80W and 500W, so the power cord can meet the standard of 2.5.

此外车库门电机使进入和保护车库变得轻松而便捷。但是，如果电源中断，您可能想知道如何打开它呢？

In addition, the garage door motor makes it easy and convenient to enter and protect the garage. However, if the power is interrupted, you may wonder how to turn it on?

不用电源打开车库门很容易。找到车库门电机上的红色应急绳，将其拉开。然后，您可以通过升起或降下手动打开和关闭门。当电源恢复供电时，请关闭门，拉动绳子以重新接合电机，然后将门滑到轨道上。

It's easy to open the garage door without power. Find the red emergency rope on the garage door motor and pull it apart. You can then manually open and close the door by raising or lowering it. When the power supply is restored, close the door, pull the rope to re engage the motor, and then slide the door onto the track.

1、拔下车库门电机的电源。车库门电机位于车库天花板上的轨道的底部。从机器上拔下电源线，以便您可以将门与自动轨道分离。万一电源重新打开，您不希望自动开启器在门未接合时尝试打开门，否则可能使您难以将门重新连接到轨道上。

1. Unplug the garage door motor. The garage door motor is located at the bottom of the track on the garage ceiling. Unplug the power cord from the machine so that you can separate the door from the automatic track. In case the power is turned on again, you do not want the automatic opener to try to open the door when the door is not engaged, otherwise it may make it difficult for you to reconnect the door to the track.

2、拉出紧急电源线，以将门与电机断开连接。找到门上方轨道上一根绳子上悬挂的红色把手。垂直向下拉动手柄，直到听到“喀哒”声为止。

2. Pull out the emergency power cord to disconnect the door from the motor. Find the red handle hanging from a rope on the track above the door. Pull the handle vertically downward until you hear "click".

3、抓住门的底部并将其笔直向上提起。您可以手动打开门。牢牢抓住门，然后将其笔直向上提起，使其沿着轨道行进。继续抬起门直到它完全打开。

3. Grasp the bottom of the door and lift it straight up. You can open the door manually. Hold the door firmly and lift it straight up so that it travels along the track. Continue to lift the door until it is fully open.

将门一直滑到地板上以将其关闭。当您准备关上车库门时，请轻轻将其降低与地面牢固连接。门的重量应使其保持关闭状态。请勿猛烈撞击或让门自行跌落，否则可能会损坏轨道或门本身。更多相关事项就来我们网站http://xl0475.com咨询吧！

Slide the door all the way to the floor to close it. When you are ready to close the garage door, gently lower it to firmly connect with the ground. The weight of the door shall keep it closed. Do not hit the door violently or let the door fall by itself, otherwise the track or the door itself may be damaged. For more information, please visit our website http://xl0475.com Consult!