调试是电动卷帘门安装的一个过程，也是重要的一个过程，调试精 确对今后的运用都起到了决定性的效果。济南卷帘门厂家为咱们讲讲怎么对电动门进行结构调试，仔细看哦!

Debugging is not only a process of the installation of the electric rolling shutter door, but also an important process. The accurate debugging has played a decisive role in the future application. Jinan roller shutter door manufacturers tell us how to debug the structure of the electric door, look carefully!

1、调试前的准备工作

1. Preparation before commissioning

⑴电动门履行器已正确安装。

(1) the actuator of electric door has been installed correctly.

⑵一切的螺丝，衔接器和电气衔接是安 全的。

(2) all screws, connectors and electrical connections are safe.

⑶电气衔接是正确的和正确实施接地和粘接。

(3) the electrical connection is correct and the correct implementation of grounding and bonding.

⑷履行组织和阀门处于良好状态，手动自在没有卡纸。

(4) the performance organization and valve are in good condition, and there is no paper jam.

⑸模仿指令，反应是正确的。

(5) imitate the command and the response is correct.

2、SIPOS电动履行器调试器

2. SIPOS electric executor debugger

⑴履行组织调整的信号，依据要求比减速。

(1) carry out the signal of organization adjustment and reduce the speed according to the requirements.

⑵相应的MCC抽屉在当地媒体上的操控面板，遥 控 器的按钮一次或屡次，履行组织的事务形式，长途操控传输，本地参数设置和调试这三种形式之间切换。

(2) the corresponding MCC drawer switches between the control panel on the local media, the button on the remote control once or repeatedly, the organizational transaction form, long-distance control transmission, local parameter setting and debugging.

⑶挑选这种形式的参数设置和调试，有四个菜单(言语设置，调试，调查，确诊)。言语设置：当您挑选所需的言语按回车键(通常是英语)，共有五种言语挑选(德语，英语，法语，西班牙语，意大利语)。

(3) to select this form of parameter setting and debugging, there are four menus (speech setting, debugging, investigation, diagnosis). Language settings: when you select the language you want, press enter (usually in English). There are five languages to select (German, English, French, Spanish, Italian).

⑷进入调试菜单，并输入四位数的PIN码(9044)，更改设置并封闭了阀门相关的参数，要害参数的显现：速度，翻开速度，紧迫起飞的速度，紧迫翻开速度，封闭端方位的关断形式，关断形式，敞开的结尾方位，大扭矩关系，大开扭矩，扭矩毛病重复，上升时刻，直流制动，电机温度保护，电机发热，调整完毕的方位，记载的扭矩曲线。假如参数的改变，只需列出的参数显现按回车键进入。按箭头键来更改参数。

(4) enter the debugging menu, input the four digit PIN code (9044), change the setting and close the valve related parameters, and display the key parameters: speed, opening speed, urgent take-off speed, urgent opening speed, closing form of closed end orientation, closing form, opening end orientation, large torque relationship, large opening torque, repeated torque faults, rising time, DC braking, motor temperature protection, motor heating, adjusted position, recorded torque curve. If the parameter changes, just list the parameters to display, press enter to enter. Press the arrow keys to change the parameters.

⑸调整到的方位调整履行组织的行程限位。首要，设置的完毕方位或封闭。是敞开的，例如，依据恰当的执法组织，以敞开的健康运转到完毕，按回车键两秒钟到达结尾的方位，在屏幕上显现一个过错，然后调整电位器，允许差错为零。按恰当的键两秒钟，封闭运转的履行组织的末端方位，然后按Enter。设置相应的屏幕显现份额，显现设置的完毕是正确的。

(5) adjust the position to fulfill the travel limit of the organization. First of all, set the end of the orientation or closed. It is open, for example, according to the appropriate law enforcement organization, with the open health running to the end, press the return key to reach the ending position in two seconds, showing a fault on the screen, then adjust the potentiometer, allowing the error to be zero. Press the appropriate key for two seconds to close the end position of the running fulfillment organization, and then press enter. Set the corresponding screen display share, and the display setting is correct.

⑹调整完毕的方位，依据本地/长途操作键，远远超越CRT屏幕显现操作与脉冲测验的灵敏度履行组织。

(6) according to the local / long-distance operation key, the orientation after adjustment is far beyond the sensitivity of CRT screen display operation and pulse test.