With the acceleration of the pace of life, people have higher requirements for all aspects. With the continuous progress of life, electric roller shutter doors will be used in many places of life, which can help people improve work efficiency and save time. So, roller shutter door is widely used, do you know its installation method, do you know its related use matters, next, Jinan electric roller shutter door for you to do related explanation.

无论是电动卷帘门，还是卷帘门，只要掌握了正确的安装方法，在安装的时候将会变得更加容易，你也不用为了如何安装电动卷帘门而烦恼了。

Whether it's electric rolling shutter door or rolling shutter door, as long as you master the correct installation method, it will be easier to install, and you don't have to worry about how to install electric rolling shutter door.

济南电动卷帘门的安装方法：

Installation method of Jinan electric rolling shutter door:

先预留出PVC管道，从控制盒的位置下端往下地平面以下，穿墙往外，轨道大致位置地平面下一定的距离，供以后伸缩门电动卷帘门室外线路入室接着安装电动卷帘门，接好线路，调试开关控制盒。

The PVC pipe is reserved first, from the lower end of the control box to below the ground level, through the wall to the outside, to a certain distance under the ground level of the approximate position of the track, for the outdoor line of the electric rolling shutter door of the telescopic door to enter the room, then the electric rolling shutter door is installed, the line is connected, and the switch control box is debugged.

之后调出门洞长度，有条件的可将门洞总长度再加长一定的长度，这样可将检修孔改成一扇小门，方便日后检修维护伸缩门电气线路。

After that, the length of the door opening can be adjusted, and the length of the hole can be lengthened by a certain length, so that the repair hole can be turned into a small door, which is convenient for maintenance and maintenance of the telescopic door electrical circuit in the future.

再将电源引到控制盒的位置下端，需要有漏电保护装置，并采用PVC暗敷。在进行确定传达室内控制盒的位置，即操纵电动卷帘门开关的装置位置。

Then, the power supply is led to the lower end of the control box, and the leakage protection device is required, and PVC is used for concealed laying. The position of the control box in the transmission room is determined, that is, the position of the device that operates the switch of the electric rolling shutter door.

安装后，在铺设轨道的同时，土建配合做好轨道处的地面，注意铺设轨道期间，路面禁止通行，以免压弯轨道。

After installation, while laying the track, the civil engineering shall cooperate with the ground of the track. During the laying of the track, the road shall be forbidden to pass to avoid bending the track.

安装完成后，需要对质量进行检测，那么，电动卷帘门该如何检测质量呢?

After the installation, the quality needs to be tested, so how to test the quality of the electric rolling shutter door?

由于电动卷门是由电机来控制门帘的上升和下降的，所以需要检查看电动卷门在上升和下降的时候是否有个缓冲的过程，这个是衡量电动卷门品质的一个重要的指标。如果没有缓冲装置的话，那样就很有可能发生事故。电动卷门防止撞击轨道，防止夹人这个标志是衡量电动卷门品质的好与坏的重要的因数。

As the electric rolling door is controlled by the motor to rise and fall the curtain, it is necessary to check whether there is a buffer process when the electric rolling door rises and falls, which is an important index to measure the quality of the electric rolling door. If there is no buffer device, then it is very likely to have an accident. The sign of preventing the electric rolling door from hitting the track and clamping is an important factor to measure the quality of the electric rolling door.

正确的安装方法是实用电动卷帘门的前提，安装完成后需要对卷帘门进行质量的检测，相信以上讲述对您了解电动卷帘门有了帮助，如果您想了解更多关于济南电动卷帘门的信息，请查阅我们的网站。

The correct installation method is the premise of practical electric roller shutter door. After the installation, the quality of the roller shutter door needs to be tested. I believe the above description is helpful for you to understand the electric roller shutter door. If you want to know more about Jinan electric roller shutter door, please refer to our website.