济南卷帘门如何消音复位，火帘控制按钮上方的复位按钮和消音器按钮是什么？

How to silence and reset Jinan rolling shutter door? What are the reset button and silencer button above the fire curtain control button?

当发生火灾时，火帘会放下，并发出响亮的警报声，但这种声音须通过按下消音器按钮人为关闭。要将此卷闸门升起，以利于顺利通行，且须先按下复位按钮，然后小心翼翼地操作升起帘门。

In case of fire, the fire curtain will be lowered and a loud alarm sound will be issued, but this sound must be manually closed by pressing the silencer button. To raise the shutter to facilitate smooth passage, first press the reset button, and then carefully operate the raised shutter.

防火门火灾报警灯一直亮着，如何复位？

The fire alarm light of the fire door is always on. How to reset it?

答：在中控室复位试试，然后如果不相信就直接把电控箱断开再通试试，如果都不行，请检查有没有误报，信号干扰，都没有问题，再换电控箱吧Fipf。

Answer: Try resetting in the central control room, and then if you don't believe it, directly disconnect the electric control box and try again. If it doesn't work, please check whether there are false alarms, signal interference, and no problem. Then replace the electric control box Fipf.

处理防火门怎么办？

How to deal with fire doors?

答：上按钮，用于控制快门向上运动；下按钮，用于控制快门向下运动；停止按钮，用于控制快门在当前状态下的停止；复位按钮，用于控制快门回到默认位置。开关锁，用于控制是否可以使用释放按钮的功能。

Answer: The up button is used to control the upward movement of the shutter; The down button is used to control the downward movement of the shutter; Stop button, used to control the stop of the shutter in the current state; The reset button is used to control the shutter to return to the default position. The switch lock is used to control whether the release button function can be used.

火灾报警器一直报警为误报，可按静音键不复位。没有复位...

The fire alarm keeps alarming as false alarm. Press the mute key without resetting. No reset

答：火灾报警控制器报火警的操作流程：

Answer: The operation process of fire alarm controller:

1、先静音。

1. Mute first.

2、查看图形显示装置的火灾位置。

2. View the fire location of the graphic display device.

3、派人用通讯工具确认现场是否发生火灾报警，如发生误报：1、现场检查并处理误报原因，并用专用工具恢复火灾报警按钮，并按下消防控制主机上的复位按钮。更多相关内容就来我们网站http://xl0475.com进行咨询！

3. Send personnel to use communication tools to confirm whether there is a fire alarm on the site. If there is a false alarm: 1. Check and handle the cause of the false alarm on the site, use special tools to restore the fire alarm button, and press the reset button on the fire control host. Come to our website for more relevant content http://xl0475.com Consult!