生活中经常能遇到电动卷帘门，有些人对电动卷帘门不是很了解，甚不知道如何调制，操作起来很不方便。下面针对问题，济南卷帘门厂家给您建议：

We often encounter electric roller shutter doors in our life. Some people don't know much about electric roller shutter doors, or even how to adjust them. It is very inconvenient to operate. The following suggestions are given to you by Jinan roller shutter manufacturer:

如何调控电动卷帘门？

How to control the electric roller shutter door?

在排除故障之前，需要松开界上的螺丝，不要太紧，然后拉起环链，使环链与地面保持一米的距离。

Before troubleshooting, it is necessary to loosen the screws on the boundary, not too tight, and then pull up the chain to keep the chain one meter away from the ground.

用手按遥控器上面的按钮，检查卷帘门的升降功能是否正常，有没有问题。

Press the button on the remote control manually to check whether the lifting function of the roller shutter door is normal and whether there is any problem.

如果卷帘门所有功能正常，将门帘升所需高度，转动螺套，调整触摸系统微动开关的滑轮，发出滴答声后拧紧螺丝。

If all functions of the roller shutter door are normal, raise the door curtain to the required height, turn the screw sleeve, adjust the pulley of the touch system microswitch, and tighten the screw after clicking.

后，将故障来回排除，完全没有问题后，就可以正常使用卷帘了。

After that, remove the fault back and forth. After there is no problem at all, you can use the roller shutter normally.

在实际使用卷帘的过程中，经常发生没有电源的情况，怎么办？

During the actual use of the roller shutter, there is often no power supply. What should I do?

如果出现短时间无电的情况，则暂时不用理会，待来电后再可使用卷帘。

If there is no power for a short time, you can ignore it temporarily and use the shutter after the call.

如果卷帘本身有应急电源，即使出现停电，也可以正常打开，不会有任何问题。

If the shutter itself has emergency power supply, it can be opened normally even in case of power failure, without any problems.

如果卷帘门没有应急电源，可以用手拉动手摇器，然后拉开检修孔，此时可以轻松打开卷帘门。

If there is no emergency power supply for the shutter door, you can pull the hand crank by hand, and then open the access hole. At this time, you can easily open the shutter door.

总的来说，电动卷帘门的故障排除方法一点都不复杂。只要你掌握正确的方法，就可以使卷帘门正常工作而不出现任何问题。更多相关内容就来我们网站http://xl0475.com咨询吧！

In general, the troubleshooting method of electric roller shutter door is not complicated at all. As long as you master the correct method, you can make the roller shutter work normally without any problems. Come to our website for more relevant content http://xl0475.com Ask!