Nowadays, the application range of rolling shutter door is more and more extensive, whether it is the enterprise or the personal garage is widely used, and the safety measures such as fire prevention and anti-theft are also very perfect. Do you know what points need to be understood when measuring the door? Next, Jinan roller shutter door manufacturers will be in the following for you to introduce, hope to help you.

1、地板

1. Floor

由于客户的实际情况千差万别，大体归为三种：一种是已经铺好地板的，用上述测量方法测量即可；第二种是未铺地板的，高度应减尺寸。

As the actual situation of customers varies greatly, it can be divided into three categories: one is that the floor has been paved, which can be measured by the above measurement method; the second is that the floor is not paved, and the height should be reduced.

A、地板砖：大理石、瓷砖统一减少50mm；B、平铺木地板、复合地板、实木地板统一减少30mm；C、打骨架木地板以骨架跟实际地板厚度增加10mm为准。

A. Floor tile: marble and ceramic tile should be reduced by 50mm; B. flat wood floor, composite floor and solid wood floor should be reduced by 30mm; C. the thickness of skeleton wood floor should be increased by 10mm.

2、单直角墙

2. Single right angle wall

测量者应该主动征求客户意见，结果：一是客户选择左右保留线条，统一美观，测量者与客户注明目标尺寸减小60mm，才可以实现保留线条的愿望。

The surveyor should take the initiative to solicit customers' opinions. The results are as follows: first, the customer chooses to keep the left and right lines in a unified and beautiful way. The surveyor and the customer indicate that the target size is reduced by 60mm, so that the desire of retaining the line can be realized.

第二是客户选择目标尺寸不变(客户要求门扇稍大一点)，须与向客户讲明，卷帘门厂家表示靠直角墙框边线条安装割小合适为止(效果是线条左右不对称)。

Second, the customer chooses the target size to remain unchanged (the customer requires the door leaf to be a little larger), and it must be explained to the customer that the rolling shutter door manufacturer said that the installation of the edge line of the right angle wall frame should be cut down until it is appropriate (the effect is that the line is asymmetric to the left and right).

车库门

Garage door

3、双面直角墙

3. Double sided right angle wall

测量者应该主动征求济南卷帘门客户意见，结果：一是客户选择左右保留线条，统一美观，测量者可以采取减小目标尺寸120mm，即可以实现上述目标；第二是客户选择目标尺寸不变，安装时安装工人把靠双面直角墙的线条割小合适为止。

The surveyor should take the initiative to solicit opinions from customers of Jinan roller shutter door. The results are as follows: first, the customer chooses to keep the line on the left and right, which is unified and beautiful. The surveyor can reduce the target size by 120mm, that is, the above goal can be achieved; second, the customer chooses the target size unchanged, and the installation workers cut the line close to the double-sided right angle wall until it is appropriate.

4、顶墙直角

4. Right angle of top wall

测量者应该主动征求济南卷帘门客户意见，一是客户选择保留线条，统一美观，测量者可以采取减小(矮)目标尺寸60mm，即可以实现上述目标；第二是客户选择目标尺寸不变，安装时安装工人把线条割小合适为止。

The surveyor should take the initiative to solicit opinions from customers of Jinan roller shutter door. First, the customer chooses to keep the line, which is unified and beautiful. The surveyor can reduce the (short) target size by 60mm, which can achieve the above goal; the second is that the customer chooses the target size unchanged, and the installation workers cut the line to be appropriate during installation.

左右墙及顶墙的墙面垂直度及倾斜度。测量者应该注意选择zui小点作为目标尺寸。

Verticality and inclination of left and right walls and top walls. The measurer should pay attention to choose Zui dots as the target size.

综上所述，测量卷帘门时需要注意的五点内容到此就讲解完了，相信大家阅读完这些内容之后对其有了进一步的了解，希望能帮到大家，另外，济南卷帘门厂家建议大家要定期对其进行维护保养，尽量延长其使用寿命。

To sum up, the five points that should be paid attention to when measuring the rolling shutter door are explained here. I believe that after reading these contents, we have a further understanding of it, hoping to help you. In addition, Jinan rolling shutter door manufacturers suggest that we should regularly maintain it to extend its service life.