The use of electric roller shutter will cause some faults if it is used for a long time, so everyone must pay attention to the maintenance of some details in the maintenance time of Jinan roller shutter, because the roller shutter also needs maintenance, just like the car, it needs a period of time for maintenance and inspection, and see the relevant performance, Then how to keep it? Next, Jinan roller shutter manufacturer will give you a detailed explanation.

　　1.使用济南卷帘门的过程,试图保持控制器的稳定性和电压,禁止安装在非常潮湿的环境中,此外,不要打开远程控制,如果发现门上身体绕线,结应当及时处理。注意通道是否堵塞，将门体堵下，若有不同反应立即停止电机运转。

　　1. In the process of using Jinan roller shutter door, try to maintain the stability and voltage of the controller. It is forbidden to install it in a very humid environment. In addition, do not open the remote control. If the body on the door is found to be wound, the knot should be handled in time. Pay attention to whether the channel is blocked, block the door body, and stop the motor immediately in case of different reactions.

　　2.济南卷帘门定期维护检查电动百叶窗行程开关,上下如期控制器加上润滑油,保持良好的操作,此外,操作员手动卷帘门,查看器的运行状态,校对和行程开关位置,使电动门打开或关闭在适当的位置,并在检查的过程中打电动卷帘门头部或底部或逆转,如果出现紧急情况应立即停止转动,切断电源。

　　2. Jinan rolling shutter door shall be maintained and inspected regularly. The up and down controller shall be lubricated as scheduled to maintain good operation. In addition, the operator shall manually open or close the rolling shutter door and the operation status of the viewer, calibrate and stroke the switch position to make the opening or closing of the electric shutter in an appropriate position, and the head or bottom of the electric rolling shutter door shall be opened or reversed during the inspection, In case of emergency, stop rotating immediately and cut off the power supply.

　　3.操作者应定期检查电动卷帘门的手动开关和手动升降装饰，以防止电动卷帘门在紧急情况下会失灵，或造成不必要的事故。

　　3. The operator shall regularly check the manual switch and manual lifting decoration of the electric rolling shutter door to prevent the electric rolling shutter door from failure or unnecessary accidents in emergency.

　　4.轨道,明确电动百叶窗跟踪,保持内部清洁,卷帘门电机和传动链补充润滑油,经常检查控制装置和开关控制盒,紧固连接端口,紧固螺丝,等,清洁表面控制箱,和按钮上的灰尘污垢,防止按钮坚持反弹。

　　4. Clear the track, clear the tracking of electric louver, keep the interior clean, add lubricating oil to the rolling shutter motor and transmission chain, frequently check the control device and switch control box, fasten the connection port, fasten the screw, etc., clean the dust and dirt on the surface control box and the button, and prevent the button from sticking to rebound.

　　以上就是我们济南卷帘门厂家为您介绍关于“济南卷帘门维修需要注意细节”,当然,我们把维护的核心部分,我们希望你可以结合知识的维护保养,以有效地保证卷帘门的使用寿命。如果您在这方面有任何问题，请及时与我们联系，我们会及时为您解决。

　　The above is our Jinan roller shutter manufacturer's introduction to "Jinan roller shutter door maintenance needs to pay attention to details". Of course, we put the core part of the maintenance, we hope you can combine the maintenance of knowledge to effectively ensure the service life of the roller shutter door. If you have any problems in this area, please contact us in time and we will solve them for you in time.