The roller shutter door and the remote control can only be used normally if they are paired. Otherwise, Jinan remote control roller shutter door remote control can not start the roller shutter door. In order to let you use it smoothly, let's show you how to pair the roller shutter door remote control.

一、卷帘门遥控器怎么配对

1、 How to pair the remote control of rolling shutter door

1、在对码之前，需要先确定你所购买的卷帘门遥控器和原先卷帘门遥控器的芯片以及相关的配件型号保持一致，需要购买和原来遥控器相匹配的，这样才可以进行对码。

1. Before checking the code, you need to make sure that the chip and relevant accessory models of the roller shutter door remote controller you purchased are consistent with those of the original roller shutter door remote controller. You need to buy the one that matches the original remote controller, so that you can check the code.

2、将购买的遥控器上面的两个按键同时按住，按下之后等遥控器上面的指示灯闪烁，就可以将手松开了。

2. Press and hold the two buttons on the purchased remote control at the same time. After pressing, wait for the indicator light on the remote control to flash, and then you can release your hand.

3、将原来的遥控器和现在正在使用的遥控器拿在一起，且同时按一下这两个遥控器上面的开门键，等指示灯闪烁之后，就表示复制成功了，等开门键复制成功，还可以复制其他的按键，复制的方法是一样的，复制好了之后就可以对码成功了。

3. Take the original remote control and the remote control currently in use together, and press the open key on the two remote controls at the same time. When the indicator light flashes, it means that the copy is successful. When the open key is copied successfully, you can also copy other keys. The copy method is the same. After the copy is completed, you can successfully match the code.

注意事项：

matters needing attention:

1、使用卷帘门遥控器时，需要确定使用的是哪种型号的遥控器，要知道芯片的型号。使用之前需要清码，可以看到遥控器上面有两个按键，指示灯闪一次之后我们就可以再按一下，之后就能够成功。

1. When using the remote control for the roller shutter door, you need to determine which type of remote control is used and the chip model. You need to clear the code before using it. You can see that there are two buttons on the remote control. After the indicator light flashes once, we can press it again, and then we can clear it successfully.

2、使用遥控器要进行对码，比如遥控器和对码的遥控器放在一起，同时按下任意的一个键，这时就会看到指示灯会闪一下，就表明复制成功了，前后可能只有1-2秒钟，再按照相同的办法把其他的三个按键都要对上。

2. Use the remote control to check the code. For example, put the remote control and the remote control of the code together, and press any key at the same time. At this time, you will see that the indicator will flash once, indicating that the copy is successful. It may only take 1-2 seconds before and after, and then use the same method to check the other three keys.

以上就是关于卷帘门遥控器怎么配对，卷帘门遥控器不好使了怎么办的全部内容，希望可以帮助大家了解卷帘门遥控器，更多相关卷帘门的内容就来我们网站http://xl0475.com咨询了解吧！

The above is all about how to match the remote control of the roller shutter door and what to do if the remote control of the roller shutter door is not working properly. I hope it can help you understand the remote control of the roller shutter door. More information about the roller shutter door can be found on our website http://xl0475.com Ask about it!