电动卷帘门操作注意事项

Precautions for operation of electric roller shutter

1.开启前应仔细观察卷帘门外观门轨、门扇有无变形、卡阻现象。控制盒安装是否稳固，有无电线外漏。如发现异常应及时通知检修人员，待故障排除后方可使用。

1. Before opening, carefully observe the appearance of the door rail and door leaf of the roller shutter door for deformation and jamming. Check whether the control box is installed firmly and whether there is wire leakage. In case of any abnormality, the maintenance personnel shall be informed in time and can be used only after the fault is eliminated.

2.在卷帘门上升（或下降）过程中，操作人员不得擅自离开操作地点，应密切注意启闭情况和执行情况，如有异常响动或门扇运行不平稳的情况，应及时按动停止按钮，切断输入电源，及时通知检修人员，待排除故障后方可重新操作。

2. During the lifting (or lowering) process of the roller shutter door, the operator shall not leave the operation site without authorization, and shall pay close attention to the opening and closing conditions and the execution conditions. If there is abnormal noise or the door leaf operates unevenly, the operator shall timely press the stop button, cut off the input power supply, timely notify the maintenance personnel, and then operate again after the fault is eliminated.

3.在启闭时卷帘门下面不准有人、货物、车辆站立、通过，以防止行程开关失灵，卷帘卡死，电机受阻和发生其它事故。

3. During opening and closing, no people, goods or vehicles are allowed to stand or pass under the roller shutter door to prevent travel switch failure, roller shutter jamming, motor blocking and other accidents.

4.卷帘门运行、滑行、传动等部位应定期检查（少每年2次），并根据需要及时加油，以保证卷帘门的正常使用。

4. The operation, sliding, transmission and other parts of the roller shutter shall be inspected regularly (at least twice a year), and the oil shall be added in time as required to ensure the normal use of the roller shutter.

5.卷帘门门帘和易锈部位，应进行定期防腐、油漆及保养处理，禁止用重物、硬物冲击门面。

5. The curtain of rolling shutter door and the rust-prone parts shall be subject to regular anti-corrosion, painting and maintenance. It is forbidden to impact the door surface with heavy and hard objects.

电动卷帘门使用的注意事项

Precautions for use of electric roller shutter door

卷帘门在上下启闭的时候查看清楚是否有堆物，特别是防火卷帘门是和消防系统联动的，经常会因为操作不当导致防火卷帘门损坏，或倾斜。而普通的电动卷帘门也应该特别注意，门帘在开闭的同时应该人在现场，万一出现门帘倾斜或者轨道卡位应该及时停止门帘开闭，这样才不会给电机和门帘造成更大的伤害。

When the rolling shutter is opened and closed up and down, check to see if there is any pile. Especially, the fire shutter is linked with the fire protection system, which often leads to damage or tilt of the fire shutter due to improper operation. And ordinary electric rolling shutter doors should also pay special attention to the fact that the door curtain should be opened and closed at the same time. In case of door curtain tilt or track jam, the door curtain should be closed and opened in time, so as not to cause greater damage to the motor and door curtain.

济南卷帘门厂提醒，门帘在开闭的同时，严禁行人及奔跑，因为门帘在开闭的时候门帘是通过联片连接的，而电机和传动轴也是存在少的不因素。所以门帘在启动的时候应该尽量不要有人跑动。

Jinan rolling shutter door factory reminded that when the door curtain is opened and closed, pedestrians and running are strictly prohibited, because the door curtain is connected through the coupling when the door curtain is opened and closed, and the motor and transmission shaft also have a few unsafe factors. So try not to run when the curtain is started.

商家在选材方面也应该多考虑，轻便，坚固耐用的材质，这样即使在特殊情况下也能起到较高的问题。

Merchants should also consider more about the selection of materials, such as lightweight, durable materials, which can play a higher safety problem even under special circumstances.

卷帘门电机的选购也是比较重要的一个环节，切记不要感觉提升力够用就行，因为卷帘门电机的承载力会随着时间的推移，会慢慢的降低实际的提升功效，所以选材方面尽量的要超过门帘的实际提升力。

The selection and purchase of the roller shutter door motor is also an important part. Remember not to feel that the lifting force is enough, because the bearing capacity of the roller shutter door motor will slowly reduce the actual lifting efficiency over time, so the material selection should be as far as possible more than the actual lifting force of the door curtain.

也是选择一个企业不可或缺的的因素，很多商家会去选择低价位，低品质的私人小作坊来制作，当然确实是降低了成本，但是反正很多小加工场为了降低制作成本，一味的降低配件材质，在安装的同时质量上根本没办法得到相应的保障，所以说您在选购该产品时就要多注意了，更多事项就来我们网站http://xl0475.com进行咨询！

Brand is also an indispensable factor in choosing an enterprise. Many businesses will choose private small workshops with low price and low quality to produce, which certainly reduces the cost. However, in order to reduce the production cost, many small processing workshops blindly reduce the material of accessories, and there is no way to ensure the quality at the same time of installation, so you should pay more attention when selecting and purchasing this product, Come to our website for more matters http://xl0475.com Consult!