遥控卷帘门安装时有哪些事情是要做好的呢？只有做正确的操作，注意正确的事项，才能顺利安装顺利使用。对此，济南卷帘门厂家的相关人士是这样讲的：

What are the things to do when installing the remote control rolling shutter door? Only by doing the correct operation and paying attention to the correct matters, can the installation and use be smooth. In this regard, the relevant personnel of Jinan roller shutter door manufacturer said:

一、量需要的卷帘门尺寸：我们需要根据自己的实际场所具体尺寸为准。可以通过水平尺进行测量。我们需要注意的是遥控卷帘门的高度需要高于门框的高度，因为这样在安装的时候更加方便，测量好尺寸后就可以让卷帘门厂家定做合适的卷帘门。

1、 The required size of roller shutter door: We need to be based on the specific size of our own actual site. It can be measured with a level ruler. What we need to pay attention to is that the height of the remote control roller shutter door needs to be higher than the height of the door frame, because it is more convenient to install. After measuring the size, the roller shutter door manufacturer can customize the appropriate roller shutter door.

二、检查电源是否正确：在遥控卷帘门的焊接前，要确定在通入遥控卷帘门的的三项电源是否都正确，这是保障卷帘门能够正常使用的关键性因素。

2、 Check whether the power supply is correct: before welding the remote control rolling shutter door, make sure whether the three power supplies connected to the remote control rolling shutter door are correct, which is the key factor to ensure the normal use of the rolling shutter door.

三、焊接安装遥控卷帘门：将定做好的遥控卷帘门与转轴焊接好，并将遥控卷帘门与门框固定安装，需要注意的是，门洞口两侧地面要预留凹槽，经校正合格后，固定木楔。

3、 Welding and installation of remote control roller shutter door: weld the fixed remote control roller shutter door with the rotary shaft, and fix the remote control roller shutter door with the door frame. It should be noted that grooves should be reserved on the ground at both sides of the door opening, and the wooden wedges should be fixed after the calibration is qualified.

四、检查遥控卷帘门：卷帘门安装好后，我们需要仔细检查是否安装符合要求，尤其是卷帘门放下来的时候是否有卡顿或是不受控制这样的情形发生，同时还需要注意的是，是否是将门洞封闭好没有缝隙。

4、 Check the remote control roller shutter door: after the roller shutter door is installed, we need to carefully check whether the installation meets the requirements, especially whether the roller shutter door is stuck or out of control when it is put down. At the same time, we need to pay attention to whether the door opening is closed without gaps.

五、准备安装工具：遥控卷帘门在安装前我们需要准备好安装卷帘门的工具，梯子、钻头、螺丝刀、水平尺、电钻机等工具，将这些工具放在安装卷帘门方便拿到的位置，准备安装遥控卷帘门。

5、 Preparation of installation tools: Before the installation of the remote control roller shutter door, we need to prepare the tools for installing the roller shutter door, such as ladders, drill bits, screwdrivers, level rules, electric drills, etc., and put these tools at the convenient positions for installing the roller shutter door. We are ready to install the remote control roller shutter door.

遥控卷帘门安装时的正确做法我们从五个方面进行讲解到的，您对此有什么注意事项可以随时来我们网站http://xl0475.com咨询了解！

We explained the correct way to install the remote roller shutter door from five aspects. If you have any precautions, please visit our website at any time http://xl0475.com Ask about it!