电动卷帘门相比起传统的卷帘门来说，减去了繁琐的开锁和拉门过程，十分适合现代人的使用。电动卷帘门安装、使用和维修过程中有许多的注意事项，许多人对此往往知之甚少，济南卷帘门小编就将为大家介绍一下这些注意事项，从而供大家有需要的时候做下参考。

Compared with the traditional roller shutter door, the electric roller shutter door reduces the tedious process of unlocking and sliding the door, and is very suitable for modern people. There are many precautions in the installation, use and maintenance of electric roller shutter doors, which many people often know little about. The Jinan roller shutter door editor will introduce these precautions for you, so as to provide you with reference when you need them.

安装注意事项

Installation precautions

电动卷帘门安装位置的上端应有可靠的防火设施，在卷帘门的卷筒下端做包箱或吊顶时须设置可拆式活动盖板，在电动卷门机一侧下端须预留500×500mm可拆检修孔，以便于维修保养。

Reliable fire protection facilities shall be provided at the upper end of the installation position of the electric roller shutter door. When the lower end of the drum of the roller shutter door is used as a packing box or ceiling, a detachable movable cover plate shall be provided, and 500 mm shall be reserved at the lower end of the side of the electric roller shutter door × 500mm removable manhole for easy maintenance.

所有电动控制的卷帘门，启闭运行方向须与开关箱指示相同，特别是在新接通电源试车或外来输入电源变换相线时，应先使用手动装置将门帘置于门洞高度1/2的位置，接通电源后试操作卷门启闭，直到与指示相附，方可正常使用，否则损坏限位器，引起卷帘反卷或冲顶等而造成损失。

The opening and closing direction of all electrically controlled roller shutter doors shall be the same as that indicated by the switch box. In particular, when the power supply is newly connected for trial run or the external input power is used to change the phase line, the manual device shall be used first to place the door shutter at the position of 1 / 2 of the door opening height. After the power supply is connected, the roller shutter shall be opened and closed for trial operation until it is attached with the indication. Otherwise, the stopper will be damaged, causing the roller shutter to reverse roll or flush, causing losses.

操作注意事项

Operating precautions

电动卷帘门操作时，操作者须站在能看到卷门运行状态的位置进行操作，否则易发生意外而受损。

During the operation of the electric roller shutter door, the operator must stand at the position where the operation state of the roller shutter door can be seen, otherwise it is easy to be damaged by accident.

电动卷帘门门帘和卷门机禁止与酸、碱性物溶液接触，以防腐蚀门帘表面。

The electric roller shutter door curtain and the roller shutter machine shall not be in contact with acid and alkaline solutions to prevent corrosion of the door curtain surface.

卷门机在运行、滑行、传动等部位应定期检查(少每年2次)，并根据需要及时加油，以保证卷帘门的正常使用。

The rolling door machine shall be regularly inspected (at least twice a year) during operation, sliding, transmission and other parts, and timely refueled as required to ensure the normal use of the rolling door.

电动卷帘门在启闭停止过程中，应具备随位停止之功能，不应有停止而继续下滑现象，如发生下滑距离大于50mm的情况出现，应立即对卷帘门控制电器和卷门机制动器进行仔细检查修理，运行正常为止。

In the process of opening and closing, the electric roller shutter door shall have the function of following the position, and shall not stop and continue to slide. If the sliding distance is greater than 50mm, the control electric appliance of the roller shutter door and the roller shutter mechanism shall be carefully inspected and repaired immediately until the operation is normal.

维修注意事项

Maintenance precautions

电动卷帘门门帘和易锈部位，应进行定期防腐、油漆及保养处理，禁止用重物、硬物冲击门面。

The electric roller shutter door curtain and rust prone parts shall be subject to regular anti-corrosion, paint and maintenance treatment. It is prohibited to impact the door surface with heavy objects and hard objects.

电动卷帘门运行时如有发生较大抖动或异常声音时应停机检查，排除有碍门帘正常启闭的杂物。

In case of large shaking or abnormal sound during the operation of the electric roller shutter door, stop the machine for inspection to eliminate the sundries that hinder the normal opening and closing of the door shutter.

电动卷帘门底梁座上限位置须与轴承架下端保持大于200mm的距离，以确保制动停止时不发生冲顶现象。

The upper limit position of the bottom beam seat of the electric roller shutter door must be kept at a distance of more than 200mm from the lower end of the bearing frame to ensure that there is no rush when the brake stops.

通过上文的介绍，我们已经大致了解了电动卷帘门安装、使用、维修过程中的注意事项。从中我们可以看到，电动卷帘门安装时要注意各个部位的连接紧密，再投入使用前要反复检查，避免使用过程中再出现些什么问题。更多相关事项就来我们网站http://xl0475.com咨询了解吧。

Through the above introduction, we have generally understood the precautions during the installation, use and maintenance of the electric roller shutter door. We can see from the above that during the installation of the electric roller shutter door, attention should be paid to the tight connection of all parts, and repeated inspection should be conducted before putting it into use to avoid any problems in the process of use. For more information, please visit our website http://xl0475.com Consult and understand.