实际上在安装完快速门之后，还是需要进行相关的检查，为确保快速卷帘门的使用性能的稳定性和使用性能，快速门的用户需要定期对性能进行检查，才能保障快速卷帘门的正常使用，接下来济南卷帘门厂家马上为大家介绍下如何进行性能检查，需要注意哪些方面呢？

In fact, after the installation of the fast door, it is still necessary to carry out relevant safety inspections. In order to ensure the stability and safety of the use performance of the fast roller shutter door, the users of the fast door need to check the safety performance regularly in order to ensure the normal use of the fast roller shutter door. Next, Jinan roller shutter door manufacturer will immediately introduce to you how to carry out the safety performance inspection and what aspects need to be paid attention to?

一、力量检查

1、 Strength check

使用遥控器关上快速卷帘门，若人员手动操作，快速门的开门器马上倒转，则说明快速门额开门器力量正常，否则就表示力量过大，需要调整开门器的力度，避免影响正常使用。

Use the remote control to close the fast shutter door. If the personnel operate it manually, and the door opener of the fast door immediately reverses, it means that the power of the fast door opener is normal and safe. Otherwise, it means that the power is too large, and the power of the door opener needs to be adjusted to avoid affecting the normal use.

二、倒转检查

2、 Reverse check

放置一块5cm高的木块在快速门底部，使用遥控器关上快速门，快速门轻碰到障碍物木块时，会马上倒转开门器。这是快速门的开门器的逻辑控制板在关门时监控着电机的电流，当启闭门遇到阻力时，电机会增大电流，开门器就会反方向运作以保障使用。

Place a 5cm high wooden block at the bottom of the fast door, and use the remote control to close the fast door. When the fast door lightly touches the wooden block of an obstacle, it will immediately reverse the door opener. This is the logic control board of the door opener of the fast door, which monitors the current of the motor when closing the door. When the door meets resistance, the motor will increase the current, and the door opener will operate in the opposite direction to ensure safety.

快速卷帘门

Fast shutter door

三、平衡检查

3、 Balance check

快速门的弹簧系统主要作用是平衡快速门的重量，在进行平衡检查快速门时，需要先将红色离合器设置脱离状态，这时手动操作快速门门不需要很太大的力，将门体到1.5米处左右再慢松手，检查快速门在弹簧的作用下是否可以处于无重状态，确保性能。

The spring system of the fast door is mainly used to balance the weight of the fast door. When checking the fast door for balance, it is necessary to set the red clutch to the disengaged state first. At this time, it does not need too much force to manually operate the fast door. Move the door body to about 1.5 meters and then slowly release it. Check whether the fast door can be in a weightless state under the action of the spring to ensure safety performance.

以上就是快速卷帘门的性能的检查项目注意事项，高质量的快速卷帘门产品性能更有保障，那么就需要我们选择有保障的实力快速门厂家，更多资讯，欢迎大家联系关注我们http://xl0475.com更多了解消息！

The above is the inspection items and precautions for the safety performance of the fast rolling shutter door. The safety performance of high-quality fast rolling shutter door products is more guaranteed, so we need to choose professional and guaranteed fast door manufacturers. For more information, please contact us http://xl0475.com Learn more!