在安装济南卷帘门之前，厂家一般需要先量好门，因为不同场地的尺寸是不一样的。如果不丈量尺寸，生产出来的门往往无法安装。那么，在丈量之前，应该注意哪些问题呢？

Before installing Jinan roller shutter door, the manufacturer generally needs to measure the door first, because the size of different sites is different. If the size is not measured, the doors produced often cannot be installed. So, what should we pay attention to before measuring?

1.两面成直角的墙。丈量师应主动征求客户意见。结果如下：客户选择保持左右线条一致且美观。丈量师可将目标尺寸缩小120mm，以达到上述目的；二是客户选择的目标尺寸不变，安装人员在墙体两边剪直角线，直到合适为止。

1. a wall with two sides at right angles. Surveyors should take the initiative to solicit customers' opinions. The result is as follows: the customer chooses to keep the left and right lines consistent and beautiful. The surveyor can reduce the target size by 120mm to achieve the above purpose; Second, the target size selected by the customer remains unchanged. The installer cuts right angle lines on both sides of the wall until it is appropriate.

2.与墙壁成直角。济南卷帘门厂家在丈量时要主动询问客户对门的意见。客户选择保持线条统一美观。丈量时，可将目标尺寸缩小（缩短）60mm，即达到上述目标。其次，客户选择的目标尺寸不变，安装人员可以适时剪线。

2. at right angles to the wall. Jinan roller shutter door manufacturers should take the initiative to ask customers' opinions on the door when measuring. The customer chose to keep the lines uniform and beautiful. When measuring, the target size can be reduced (shortened) by 60mm, that is, to achieve the above goals. Secondly, the target size selected by the customer remains unchanged, and the installer can cut the thread in time.

3.在地板上。由于客户的实际情况相差较大，一般分为三种：一是地板已经铺好，可以用丈量法丈量；二是如果不铺设地板，应降低高度：

3. on the floor. As the actual situation of customers is quite different, it is generally divided into three types: first, the floor has been paved and can be measured by measuring method; Second, if the floor is not laid, the height shall be reduced:

（1）地砖：大理石、瓷砖减薄50mm；

(1) Floor tile: marble and ceramic tile shall be thinned by 50mm;

（2）瓷砖木地板、强化木地板、实木地板减少30mm；

(2) Ceramic tile wood floor, laminate wood floor and solid wood floor shall be reduced by 30mm;

（3）骨架木地板与实际骨架地板的厚度增加10mm。

(3) The thickness of skeleton wood floor and actual skeleton floor shall be increased by 10mm.

（4）左右墙、顶墙的垂直度和倾斜度。丈量师应仔细选择合适的点作为目标尺寸。

(4) Verticality and inclination of left and right walls and top walls. The surveyor should carefully select the appropriate point as the target size.

（5）安装人员应主动征求客户意见。只有当调查人员和客户表示目标尺寸减少了60毫米时，才实现了保留生产线的愿望。二是客户选择的目标尺寸相同（客户要求门扇大一些），一定要跟客户说明，小切口要根据直角墙框的边缘来搭配（效果是线左右不对称）。

(5) The installer should actively seek the customer's opinions. The desire to retain the production line was realized only when the investigator and the customer stated that the target size had been reduced by 60mm. Second, the target size selected by the customer is the same (the customer requires the door leaf to be larger), so it must be explained to the customer that the small cut should be matched according to the edge of the right angle wall frame (the effect is that the line is asymmetric from left to right).

在卷帘门正式安装之前，济南卷帘门厂家要提前派负责人进行丈量，以便生产出尺寸规格更合适的门，方便用户使用。另外，安装完成后，检查门是否可以正常开启和关闭，以免影响日常使用。更多相关内容就来关注我们网站xl0475.com吧！

Before the formal installation of roller shutter door, the manufacturer of Jinan roller shutter door shall send a person in charge to measure in advance, so as to produce doors with more appropriate dimensions and specifications for the convenience of users. In addition, after installation, check whether the door can be opened and closed normally to avoid affecting daily use. For more information, please visit our website xl0475.com!